The Kushlan Products 600 Direct Drive Mixer is filled with features that make this rugged mixer affordable yet ideal for the do-it-yourselfer and professional. This wheelbarrow mixer is supported by a heavy gauge steel frame and polyurethane flat free tires. The 3/4 HP electric motor provides 28 rotations per minute. The 5/16" gauge polyethylene drums are resistant to dents, cracks, and rust yet easy to clean. Telescoping steel handles allow for easy breakdown for transport or storage. Flat Free Tires. The 6 cu. ft. capacity drum holds up to 280 lb or 4 - 70 lbs. bags of premixed concrete. CE, UL, and CSA Approved.

Key features of the commercial grade L.B. White Premier® Portable Gas Heater for industrial and construction sites

Heat outputs from 40,000 to 350,000 Btu/h

LP (liquid propane) and dual fuel models available

Versatile indoor and outdoor placement of heater

Direct-fired = 99.97% fuel efficiency

High volume of air output for maximum heat distribution

Dependable, electronic spark ignition

Switch fuels easily with simple valve turn on dual fuel units (Premier 80® DF Now Available!)

Tri-shield finish provides superior protection against abrasion and corrosion

Easy to transport

Vent mode for circulation of air

100% test fired at our plant

Two stage heat output (Premier® 350LP)

Remote start thermostat standard (1.4 ft cord for 40/80/80DF/170/170DF models, 20 ft cord for 350 DF model)

12' extendable ducting for 80 and 170 models (12" or 18")

CSA US and Canada certified

Panellift® 439

If the work requires heavier than 150-pound sheetrock, then the 439 is the model to use. Featuring a heavier load weight capacity, higher standard reach, chain-driven and made in the USA, the Panellift® model 439 takes working abilities to the next level.

Panellift® brand, steel body, chain-driven, made in the USA. Extension and accessories available.

Genuine Panellift® brand

Easy assembly - no tools required

Torque limiter prevents overloading

Sheets up to 4’x16'

3-year limited warranty

Max load rating 200 lbs.

Heatstar 125,000 -170,000 BTU Forced Air Propane Heater is built to last with high quality components.

125,000 - 170,000 BTU per hour

For use with propane gas

Heats up to 4,000 sq.ft

Rugged and durable steel construction

Economical, efficient and clean burning

Heavy duty high output fan

Hose and regulator included

100 lb. propane tank is required

FEATURES
Extended Run Fuel Tank with gauge and easy access fuel valve
Heavy Duty Full Roll Cage protection
Idle Control
Hydraulic / Magnetic Circuit Breakers
Easy to Read Control Panel
Premium Brushless Alternator
Wheel Kit available
Honda Engine with low oil alert
Backed by Koshin

EU2200ITAN (49 State), EU2200iTAG (California)

2200 watt 120V inverter generator with CO-MINDER™

Ideal for TV, DVD, satellite, fridge, coffee pot, & more
Super quiet & lightweight
Inverter - stable power
Honda My Generator app + Bluetooth® capability
CO-MINDER: advanced carbon monoxide detection system

The EU2200i delivers 10% more power than the previous EU2000i - enabling you to power more of what you need, in the same lightweight, compact package. Whether it's an extra refrigerator at home, a larger saw on your construction site, a larger TV at your tailgate party, the EU2200i gives you the power to get more done.

Patented sprinkler system dispenses a sheet of water uniformly across the base to prevent asphalt from sticking and helps reduce dust in dirt applications

Self-cleaning open base plate design eliminates dirt build up. Reduces maintenance and increases uptime.

Kevlar belt mounted on an offset sheave greatly reduces belt stress and extends the belt life

Heavy-duty dual stage shock mounts provide superior vibration isolation to the engine and components. Helps prevent component wear and reduces operator stress and fatigue.

The Forward Plate FP-2200 is designed for powerful performance on smaller area jobs compacting trenches, granular soil, or asphalt.

Powerful and extremely light TE-S breaker for concrete and demolition work

Working direction: Floor

Tool chuck type: TE-S

Weight according EPTA-Procedure 01/2003: 32 lb.

Features
Very low tool weight combined with high demolition performance for dedicated floor breaking
T-design for perfect handling in floor-breaking applications
Maintenance-free brushless SR motor and triple-chamber lubrication systems for longer service intervals and tool lifetime
Active Vibration Reduction (AVR) makes the tool less tiring to use - helping to increase daily productivity
Detachable supply cord for quick and easy replacement of damaged/broken cords on the jobsite

Applications
Medium-duty demolition of concrete slabs and foundations
Removing concrete for rebar connections and utility connections
Breaking work on concrete or other materials in basements and on patios in residential applications
Breaking out channels for laying pipe in plumbing applications

The DD 150-U is great for rig-based wet drilling in concrete for pipe penetrations, cable trays and ducts and for the installation of railings and barriers, hand-guided wet drilling for setting large-diameter anchors and reinforcing bars, and hand-guided dry drilling in masonry for pipe penetrations in plumbing, heating and air conditioning installations and for chimney and stove installation.

40', Aluminum, Type IA, Extension Ladder, 300 LB Duty Rating, Quick Latch, Safety Rung Lock, Mar-Resistant End Caps, Swivel Safety Shoes, D-Shaped Rungs, Meets OSHA, CSA, & ANSI Standards, Rope & Pulley, Modified I-Beam Construction.

Pneumatic, Hardwood Flooring Stapler. Use to install 3/4" solid hardwood flooring, Uses Bostitch #BCS1512, True Value #406231, #BCS1514, True Value #406256, & #BCS1516, True Value #406280 Staples.

13 Amp, 120V Rotary Hammer

Coil Roofing Nailer

Consistent with Skyjack’s robust and reliable design features, the SJIII 3219 offers an easy to service, low maintenance design in a compact and versatile package. Featuring a 3’ roll out extension deck, a working height of 25’ and 25% gradeability, the SJIII 3219 boasts an industry leading capacity of 550 lbs. Equipped with variable speed front wheel hydraulic drive and 90° steering, it is capable of maneuvering in the smallest spaces

This bull float is made from lightweight magnesium, and is used to level and smooth the surface prior to finishing. Magnesium floats provide a smoother finish than wood floats

Electric Wallcovering Steamer for easy removal of wall coverings

2"-4" Pipe Cutter, Heavy-Duty 4-S

Cutter 1/8"-2", Heavy-Duty 2-A

Little Beaver "Towable" hydraulic earth drills offer forward and reverse auger rotation along with easy counter balance operation. The 3-point towbar connects with a single pin that allows easy connection and removal. Can be easily manuvered around any job site and can handle up to a 16" diameter auger. Also known as a tow-behind or teater tauter type drill

These versatile heaters, used by many to heat tents for events, are also great for small or large work spaces, renovation jobs, and any application where an enclosed flame or low noise is important. Premier heaters can be used to provide heat or simple air circulation inside, or be ducted in from the outside

VP-U Vacuum Pump

GL12 Straddle Material Lift

12' height

350 pound capacity

Linoleum Roller is a tool used to flatten, smooth and apply weight when installing adhesive backed linoleum